Crate Washer 400
Compact conveying crate washing machine comes with integrated main wash and rinsing
zone, for fast and effective cleaning of slight to moderately contaminated plastic crates.
The unit is divided into a main wash and a rinsing zone. In the main
wash zone the crates are cleaned with circulating water which is
invariably kept at the desired temperature by the installed tank heater.
The water of the main wash zone is constantly filtered by the
filtration system. In the rinsing zone the crates are rinsed with clean
fresh water and subsequently conducted into the tank of the main wash
zone to be re-used. This procedure achieves superb wash results while
minimizing water, energy, and chemical consumption.
Following is the blow off zone that can be added to this piece of
equipment. The crates are blown off with cold air from all sides by a
high-pressure blower with high drying efficiency.
In order to ensure an optimal cleaning of all faces, the crates are
transported by a conveyor chain at even distances through the unit; the
installed rotatable Clip-eyelet flat nozzles ensure an efficient
cleaning of the crates.
Specifications:
- Capacity: 400 per hour (step switch option allows 300-600 per hour)
- Stainless steel
- Washing temperature: 30- 55°C adjustable
- Rinsing temperature recommended: 50 - 85 °C (provision by the customer)
- Height adjustable
|
|
Crate Washer without Blower
|
Crate Washer with Blower
|
|
Dimensions L x W x H
|
3300 x 1200 x 1650mm
|
5300 x 1200 x 1650mm
|
|
Belt Speed
|
4,67 mtr./min
|
4,67 mtr./min
|
|
Belt drive
|
0,6kW
|
0,6kW
|
|
Power
|
5,5kW
|
5,5kW
|
|
Water circulation through the washing nozzles
|
700 l/min
|
700 l/min
|
|
Tank capacity
|
300 liters
|
300 liters
|
|
Water consumption approx.
|
0,5 – 0,6 l/crate
|
0,5 – 0,6 l/crate
|
|
Tank heating
|
3 x 9kW – Electrical screw-in heater
|
3 x 9kW – Electrical screw-in heater
|
|
Nozzle
|
Clip-eyelet, rotatable flat jet nozzles
|
Clip-eyelet, rotatable flat jet nozzles
|
|
Filter system
|
AISI 304 removable insert filter, 2mm perforation
|
AISI 304 removable insert filter, 2mm perforation
|
|
Directional control
|
Integrated in the hold-down system
|
Integrated in the hold-down system
|
|
Conveying system
|
Transport chain with carrier
|
Transport chain with carrier
|
|
Electrical connection
|
400V / 50Hz, 3Ph + N + PE
Other options available upon request
|
400V / 50Hz, 3Ph + N + PE
Other options available upon request
|
|
Control voltage
|
24V
|
24V
|
|
Total voltage
|
33kW
|
38kW
|
|
Water connection
|
2 x 1/2”1- 10 bar, cold or warm water
|
2 x 1/2”1- 10 bar, cold or warm water
|
|
Rinsing
|
1 x circumferential nozzle rings
|
1 x circumferential nozzle rings
|
|
Nozzle
|
Brass flat jet nozzles
|
Brass flat jet nozzles
|
|
Water pressure at nozzle
|
4,5 bar
|
4,5 bar
|
|
Blower
|
N/A
|
1 x 5.5kW
|
|
Tank emptying
|
1 x 1 ½ inch ball valve
|
1 x 1 ½ inch ball valve
|
Options
- Drying module – Heating system with higher air blowers and uses electric energy
- Drying via centris - Pallet spinner to remove excess water with less energy consumption
- Water filtration
- Fume extraction exhaust system
- One-man operation
- With conveyor belts
- Dosing pump
*Can be customized according to customer requirements*
